Router Repeater Bridge Access Point

For sale: Router, Repeater, Bridge, Access Point device 5G Used to retransmit internet to long distances or within villas, palaces, and farms The CPE610 device is designed for long-range wireless connectivity, especially in outdoor environments. It is commonly used by Wireless Internet Service Providers (WISPs) to connect networks to remote locations without the need for wired connections. Full technical specifications: 1. Wireless Connectivity • Supports frequency range from 5.15 to 5.85 GHz using IEEE 802.11a/n standards. • Speeds up to 300 Mbps when using a 40 MHz bandwidth (dynamic), speeds decrease to 144.4 Mbps at 20 MHz, and to 72.2 Mbps and 36.1 Mbps at 10 MHz and 5 MHz respectively. • Uses TDMA (Time Division Multiple Access) technology via Pharos MAXtream to improve efficiency and latency when connecting multiple devices in congested environments. 2. Hardware Components • Qualcomm processor running at 560 MHz with MIPS 74Kc architecture. • Memory: 64 MB DDR2 RAM and 8 MB Flash. • Ethernet port with PoE support (10/100 Mbps Shielded) for data and power delivery over a single cable. 3. Antenna and Coverage • Directional Cassegrain-type antenna with 23 dBi gain, supporting 2×2 MIMO technology, and a metal reflector to enhance signal direction and focus. • Beamwidth: approximately 9° horizontally and 7° vertically (Azimuth & Elevation). 4. Weather Resistance and Protection • Weatherproof housing rated IP65 (protected against water and dust). • High-level electrical surge protection: 15 kV against electrostatic discharge (ESD) and 6 kV against lightning strikes. 5. Installation and Management Features • Easy and quick installation thanks to snap-lock components and pole-mount kit. • Centralized management via free Pharos Control software, as well as web-based PharOS interface. 6. Software Settings • Supports multiple operation modes: AP (Access Point), Client, Bridge, Repeater, WISP Gateway, and others. • Advanced networking settings such as Static/DHCP/WAN distribution, NAT, QoS, firewall (SPI), Denial-of-Service protection, IP/MAC Binding, and more. • Wireless security options including WPA/WPA2 (AES/TKIP), WEP, VLAN, MAC address filtering, and others. 7. Power and Packaging • Uses passive PoE with DC voltage of 16–27 V, consumes approximately 7.41 W, and can be powered over Ethernet cables up to 60 meters long. • Device dimensions are approximately 366 × 280 × 207 mm. • Comes with PoE unit, pole mounting straps, and power cable. Summary of device applications: • Long-distance point-to-point connectivity or wide-area internet distribution for distant users. • Ideal for Wireless Internet Service Providers (WISP) or projects requiring strong outdoor coverage and resilience to harsh weather conditions. • Supports centralized management and advanced configurations for easy maintenance and operation