Rig Liaison-man (Saudi Arabia)

Description: Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking a project Management specialist to join joint Venture projects Support Division (JVPS) Joint Venture Projects Support Division (JVPS) under Fuels Strategy & Capital Planning Department (FS&CPD) is responsible for providing oversight and support to Aramco affiliates projects within Downstream Fuels portfolios. This includes providing an independent view to decision makers on project progress, identifying areas of improvement and recommending corrective actions. Your primary role is to lead and conduct project execution capability assessment or project health check assessment to identify gaps that will impact project execution. You are also going to provide project management consultations to project teams as required. Key Responsibilities As the successful candidate you will be required to perform the following: Conduct project execution capability assessment or project health check assessment for joint venture projects and present the outcome to the project sponsor. Analyze projects performance and present results to the project team and project sponsor. Prepare reports to analyses project progress in development or execution stages Facilitate project risks analysis. Collect and analyze projects lessons learned Support project team by providing them with consultation in project management best practices and procedures. Review and analyze project economics, governance, organization setup, execution strategy, cost estimating, scheduling, contracting, procurements, risk management. Provide support to develop the business plan, project feasibility study, project technical development. Analyze claims and advice on negotiation strategies. Conduct benchmarking studies. Minimum Requirements As the successful candidate you will hold a Bachelor’s degree in engineering from a recognized and approved program. A master degree in engineering is preferred. You will have 15 years work experiences in project management, including at least 10 years as project or construction engineer. you must have PMP certificate from Project Management Institute (or equivalent) You must have work experiences in mega projects for refineries, petrochemicals or infrastructure industries. you will also have experiences in developing project scope, project schedule and cost estimates. You must have experience and knowledge in modularization and stick built construction processes. you will be able to demonstrate knowledge in project engineering practices, governance, bid evaluation, cost estimating, planning, scheduling and technical development. You will have the ability to work in international business environment and cross-cultural professional. you must have professional level in working with MS office (Excel, Word and PowerPoint) and Power BI. Presentation skills and efficient communication are necessary. Application Link: https://careers.aramco.com/expat_us/job/Project-Management-Specialist/856015723/

Description: Aramco energizes the world economy. Aramco occupies a special position in the global energy industry. We are one of the world’s largest producers of hydrocarbon energy and chemicals, with among the lowest Upstream carbon intensities of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking an experienced Reliability Engineer to join our Global Manufacturing Excellence organization under the Downstream Assets Reliability Solutions Department (RSD). Reliability Solutions Department (RSD) provides engineering support to Saudi Aramco Global Manufacturing wholly owned and affiliates’ facilities (Refining, NGL Processing, and Petrochemicals). This includes reliability, inspection, corrosion management, static equipment, rotating equipment, electrical equipment, instrumentation and control support. Your primary role as a Reliability Engineer is to support Global Manufacturing portfolio to achieve the highest level of reliability for plants’ assets through a systematic approach and coordinated efforts. You will also administer a holistic system to benchmark, identify gaps and deploy comprehensive solutions to enhance asset reliability. Key Responsibilities As the successful candidate you will be required to perform the following: Collaborate with organization management as well as with facilities management to drive reliability initiatives and programs systematically. Design, build and drive strategies to enhance reliability performance in order to minimize downtime and increase availability. Promote and enhance reliability culture in the organization and portfolio facilities. Have the ability to manage an initiative from the inception of the idea to the deployment of the full program Oversee a system that proactively identifies and addresses potential issues/ threats that could impact normal operation or equipment reliability Own the availability enhancement cycle ensuring that major reliability/ availability events are properly reported, tracked, investigated and measures are taken to avoid reoccurrence. Serve as a consultant to the different organization entities concerning reliability matters Communicates effectively with all stakeholders to provide updates on the progress of reliability initiatives, related challenges as well as the roadmap for future programs. Ensures alignment and adherence to corporate standards, processes and guidelines. Collaborate with corporate entities on reliability initiatives and programs to ensure full alignment. Establish reliability KPIs and related KPIs structure that different levels of the organization need to oversee Analyze reliability metrics and identify areas of improvement and provide cost effective recommendations to uplift the overall reliability of the portfolios’ plants. Develops requirements for training, certifications and professional development opportunities for reliability professionals and related fields Work with the different organizations and entities to develop digital solutions and tools concerning reliability. Minimum Requirements As a successful candidate you will hold a: Bachelor’s degree in Engineering /advanced degree in reliability is preferable. 15 years of experience in reliability engineering in the Oil and Gas Industry’s downstream sector. Twenty years is preferable. Previous experience in managing and driving reliability projects Demonstrate knowledge in the use of various reliability and Root Cause Analysis (RCA)/ Investigation software Black-belt Six Sigma certification is a plus. Demonstrate strong leadership qualities and team building skills to drive and liaise with people at all levels. Excellent oral and written communication skills in English Demonstrate an In-depth knowledge in change management and problem-solving techniques. Application Link: https://careers.aramco.com/expat_us/job/Reliability-Engineer/855874223/

Description: Aramco energizes the world economy. Aramco occupies a unique position in the global energy industry. We are the world's largest producer of hydrocarbons (oil and gas), with the lowest upstream carbon intensity of any major producer. With our significant investment in technology and infrastructure, we strive to maximize the value of the energy we produce for the world along with a commitment to enhance Aramco’s value to society. Headquartered in the Kingdom of Saudi Arabia, and with offices around the world, we combine market discipline with a generations’ spanning view of the future, born of our nine decades experience as responsible stewards of the Kingdom’s vast hydrocarbon resources. This responsibility has driven us to deliver significant societal and economic benefits to not just the Kingdom, but also to a vast number of communities, economies, and countries that rely on the vital and reliable energy that we supply. We are one of the most profitable companies in the world, as well as amongst the top five global companies by market capitalization. Overview We are seeking a project control specialist to join joint Venture projects Support Division (JVPS) Joint Venture Projects Support Division (JVPS) under Fuels Strategy & Capital Planning Department (FS&CPD) is responsible for providing oversight and support to Aramco affiliates projects within Downstream Fuels portfolios. This includes providing an independent view to decision makers on project progress, identifying areas of improvement and recommending corrective actions. Your primary role is to lead and conduct project health check assessment process and advice on mitigation plans to maintain project cost and schedule. You are also going to provide project control services to project team as required. Key Responsibilities As the successful candidate you will be required to perform the following: Conduct project health check assessment for joint venture projects and present the outcome to the project sponsor. Review and monitor projects performance and present results to the project team and project sponsor. Prepare reports to analyses project progress in development or execution stages. Perform project risks analyses. Manage the database for projects lessons learned. Conduct benchmarking studies. Support project team by providing them with the best practices in project oversight and project control. Provide consultation services in project management such as project economics, governance, organization setup, cost estimating, scheduling, procurements and risk management. Provide support to develop the business plan, project feasibility, project technical development Analyze claims and advice on negotiation strategies. Minimum Requirements As the successful candidate you will hold a Bachelor’s degree in engineering from a recognized and approved program. A master degree in engineering is preferred. You will have 15 years work experiences in project management, including at least 10 years in project control e.g., planning, scheduling and cost control. you must have PMP and PMI-SP certificates from Project Management Institute (or equivalent certificates) you must be certified by & AACEI (Advanced Association of Cost Engineer) or equivalent certificates. You must have work experiences in mega projects for refineries, petrochemicals or infrastructure industries. you will also have experiences in developing project scope, project schedule and cost estimates. You must have the capability to enhance benchmarking database from cost and industry perspective. Application Link: https://careers.aramco.com/expat_us/job/Project-Control-Specialist/856397523/

Bachelor's graduate in English language, I have extensive practical experience in the fields of accounting and finance, information technology, and sales. I possess strong skills in financial account management, auditing, and using a variety of advanced accounting systems such as QuickBooks, Odoo, SAP, and Pro Onex. In addition, I have advanced capabilities in computer maintenance, database management (Oracle, SQL), and sales and marketing management. I am seeking a job opportunity through which I can utilize my diverse skills in leadership, problem-solving, and working under pressure to contribute to achieving the company's goals.

Join Müller's Solutions as a Legal Expert in Regulatory Instruments and play a vital role in ensuring our organization adheres to legal standards and regulations. In this position, you will provide expertise in the analysis, interpretation, and implementation of regulatory instruments, helping us navigate complex legal landscapes and mitigate risk. Responsibilities: Review, analyze, and interpret regulatory instruments to ensure compliance with applicable laws and regulations. Provide legal advice and guidance to internal teams regarding regulatory matters. Conduct legal research and stay updated on changes in laws and regulations that may impact the organization. Assist in drafting and reviewing legal documents, contracts, and agreements related to regulatory compliance. Collaborate with cross-functional teams to implement compliance programs and ensure adherence to legal standards. Train and educate staff on regulatory requirements and best practices. Engage with regulatory bodies and represent the organization in legal matters as needed. Prepare reports and documentation related to compliance and regulatory activities. Requirements Requirements: Law degree (JD or equivalent) with a specialization in regulatory law or compliance. Proven experience as a legal expert or regulatory compliance officer, preferably in a corporate environment. Strong knowledge of regulatory frameworks and legal standards relevant to the industry. Excellent research, analytical, and problem-solving skills. Ability to communicate complex legal concepts clearly and concisely to non-legal stakeholders. Strong attention to detail and ability to manage multiple priorities. Experience in drafting and reviewing legal documents and contracts. Excellent interpersonal and negotiation skills. Ability to work independently and collaboratively within a team.

Job Description We are seeking an enthusiastic and detail-oriented Graduate Engineer - Mechanical to join our innovative team in Riyadh, Saudi Arabia. This exciting opportunity offers a supportive environment for a recent graduate to develop their skills and contribute to cutting-edge mechanical engineering projects. Assist in conducting engineering design under the supervision of experienced engineers Create designs, calculations, sketches, diagrams, schematic drawings, and final working drawings Collect and analyze data to support engineering projects and decision-making processes Utilize computer software to solve basic engineering problems and improve design efficiency Collaborate with cross-functional teams to develop and implement mechanical solutions Participate in project planning and execution, adhering to agreed-upon budgets and schedules Contribute to the continuous improvement of engineering processes and methodologies Prepare technical reports and presentations to communicate project progress and results Stay updated on industry trends and emerging technologies in mechanical engineering Qualifications Bachelor's degree in Mechanical Engineering from an accredited institution Proficiency in English (written and spoken) is essential Strong analytical and problem-solving skills with attention to detail Exposure to CAD software, such as AutoCAD or SolidWorks Familiarity with computer software for solving engineering problems Excellent written and verbal communication skills Ability to work collaboratively in a team environment Strong organizational skills and ability to manage multiple tasks efficiently Knowledge of mechanical engineering principles and practices Enthusiasm for learning and applying new technologies in the field Ability to work under supervision and follow established procedures Willingness to take initiative and contribute innovative ideas