Laser Printer (Laser Engraving Machine)

The Elekslaser A3 Pro laser printer is primarily designed for engraving a wide range of soft and medium-hardness materials. Below is a list of materials it can typically engrave: Materials that can be engraved: * Wood: various types such as bamboo, plywood, and hardwood. * Plastic: certain types of plastic that do not significantly reflect the laser and do not produce toxic fumes when burned. * Leather: engraving on natural and synthetic leathers. * Paper and cardboard: ideal for engraving on thick paper and cardboard. * Bamboo. * Horn. * Sponge paper. * Some fabrics. * Anodized or coated aluminum: engraving on aluminum with an oxidized layer or paint coating. * Printed circuit boards (PCBs): sometimes used to engrave the solder mask layer. * Some 3D printed materials (such as PLA). Materials that generally cannot be engraved: Due to its use of a relatively low-power diode laser (typically 2.5W or 5.5W), it cannot engrave: * Reflective or solid metals: such as steel, copper, gold, silver. * Stones. * Ceramics. * Glass: the laser is usually too weak to leave a permanent mark on glass, which may require special techniques. * Transparent or reflective materials: because the laser passes through or reflects off them. Important Notes: * Laser power: the machine's ability to engrave or cut may vary depending on the installed laser power (2.5W, 5.5W, or higher). Higher-powered lasers can cut thinner materials such as some fabrics or thin plywood. * Ventilation: always ensure adequate ventilation when using the laser printer, especially when engraving plastic or materials that may produce fumes. * Focus: properly adjusting the laser focus is crucial for achieving the best engraving results on different materials. If you have a specific material you wish to engrave, it is always best to perform a small test first to verify results and avoid damaging the material. Laser Engraving and Carving Device Used device in excellent condition, ideal for hobbies and small DIY projects. Allows you to engrave and carve wood, leather, fabric, and more with high precision and consistent speed. - - Compatible with LightBurn and LaserGRBL software for effortless G-code export Price and Offer Price: 600 SAR (negotiable for serious buyers) Free delivery within Al-Taif, Paid delivery to other cities in Saudi Arabia. - Contact Message me privately or contact via: 📞 056988384 The device is clean—don't miss this opportunity!